All Versions
Latest Version
Avg Release Cycle
132 days
Latest Release
178 days ago

Changelog History
Page 4

  • v3.0.b2 Changes

    May 28, 2013
    • The behavior of the program option user has changed. In all previous versions, if supervisord failed to switch to the user, a warning would be sent to the stderr log but the child process would still be spawned. This means that a mistake in the config file could result in a child process being unintentionally spawned as root. Now, supervisord will not spawn the child unless it was able to successfully switch to the user. Thanks to Igor Partola for reporting this issue.

    • If a user specified in the config file does not exist on the system, supervisord will now print an error and refuse to start.

    • โช Reverted a change to logging introduced in 3.0b1 that was intended to allow multiple processes to log to the same file with the rotating log handler. The implementation caused supervisord to crash during reload and to leak file handles. Also, since log rotation options are given on a per-program basis, impossible configurations could be created (conflicting rotation options for the same file). Given this and that supervisord now has syslog support, it was decided to remove this feature. A warning was added to the documentation that two processes may not log to the same file.

    • ๐Ÿ›  Fixed a bug where parsing command= could cause supervisord to crash if shlex.split() fails, such as a bad quoting. Patch by Scott Wilson.

    • It is now possible to use supervisorctl on a machine with no supervisord.conf file by supplying the connection information in command line options. Patch by Jens Rantil.

    • ๐Ÿ›  Fixed a bug where supervisord would crash if the syslog handler was used and supervisord received SIGUSR2 (log reopen request).

    • ๐Ÿ›  Fixed an XML-RPC bug where calling supervisor.getProcessInfo() with a bad name would cause a 500 Internal Server Error rather than the returning a BAD_NAME fault.

    • โž• Added a favicon to the web interface. Patch by Caio Ariede.

    • ๐Ÿ›  Fixed a test failure due to incorrect handling of daylight savings time in the childutils tests. Patch by Ildar Hizbulin.

    • ๐Ÿ›  Fixed a number of pyflakes warnings for unused variables, imports, and dead code. Patch by Philippe Ombredanne.

  • v3.0.b1 Changes

    September 10, 2012
    • ๐Ÿ›  Fixed a bug where parsing environment= did not verify that key/value pairs were correctly separated. Patch by Martijn Pieters.

    • ๐Ÿ›  Fixed a bug in the HTTP server code that could cause unnecessary delays when sending large responses. Patch by Philip Zeyliger.

    • When supervisord starts up as root, if the -c flag was not provided, a warning is now emitted to the console. Rationale: supervisord looks in the current working directory for a supervisord.conf file; someone might trick the root user into starting supervisord while cd'ed into a directory that has a rogue supervisord.conf.

    • ๐Ÿ“š A warning was added to the documentation about the security implications of starting supervisord without the -c flag.

    • โž• Add a boolean program option stopasgroup, defaulting to false. When true, the flag causes supervisor to send the stop signal to the whole process group. This is useful for programs, such as Flask in debug mode, that do not propagate stop signals to their children, leaving them orphaned.

    • ๐Ÿ‘ Python 2.3 is no longer supported. The last version that supported Python 2.3 is Supervisor 3.0a12.

    • โœ‚ Removed the unused "supervisor_rpc" entry point from

    • ๐Ÿ›  Fixed a bug in the rotating log handler that would cause unexpected results when two processes were set to log to the same file. Patch by Whit Morriss.

    • ๐Ÿ›  Fixed a bug in config file reloading where each reload could leak memory because a list of warning messages would be appended but never cleared. Patch by Philip Zeyliger.

    • โž• Added a new Syslog log handler. Thanks to Denis Bilenko, Nathan L. Smith, and Jason R. Coombs, who each contributed to the patch.

    • Put all change history into a single file (CHANGES.txt).

  • v3.0.a9 Changes

    August 13, 2010
    • Use rich comparison methods rather than cmp to sort process configs and process group configs to better straddle Python versions. (thanks to Jonathan Riboux for identifying the problem and supplying an initial patch).

    • โœ… Fixed test_supervisorctl.test_maintail_dashf test for Python 2.7. (thanks to Jonathan Riboux for identifying the problem and supplying an initial patch).

    • ๐Ÿ›  Fixed the way that supervisor.datatypes.url computes a "good" URL for compatibility with Python 2.7 and Python >= 2.6.5. URLs with bogus "schemes://" will now be accepted as a version-straddling compromise (before they were rejected before supervisor would start). (thanks to Jonathan Riboux for identifying the problem and supplying an initial patch).

    • โž• Add a -v / --version option to supervisord: Print the supervisord version number out to stdout and exit. (Roger Hoover)

    • ๐Ÿ“œ Import iterparse from xml.etree when available (eg: Python 2.6). Patch by Sidnei da Silva.

    • ๐Ÿ›  Fixed the url to the supervisor-users mailing list. Patch by Sidnei da Silva

    • ๐Ÿ“œ When parsing "environment=" in the config file, changes introduced in 3.0a8 prevented Supervisor from parsing some characters commonly found in paths unless quoting was used as in this example::


    Supervisor once again allows the above line to be written as::


    Alphanumeric characters, "_", "/", ".", "+", "-", "(", ")", and ":" can all be used as a value without quoting. If any other characters are needed in the value, please quote it as in the first example above. Thanks to Paul Heideman for reporting this issue.

    • Supervisor will now look for its config file in locations relative to the executable path, allowing it to be used more easily in virtual environments. If sys.argv[0] is /path/to/venv/bin/supervisorctl, supervisor will now look for it's config file in /path/to/venv/etc/supervisord.conf and /path/to/venv/supervisord.conf in addition to the other standard locations. Patch by Chris Rossi.
  • v3.0.a8 Changes

    January 20, 2010
    • Don't cleanup file descriptors on first supervisord invocation: this is a lame workaround for Snow Leopard systems that use libdispatch and are receiving "Illegal instruction" messages at supervisord startup time. Restarting supervisord via "supervisorctl restart" may still cause a crash on these systems.

    • Got rid of Medusa hashbang headers in various files to ease RPM packaging.

    • ๐Ÿ‘ Allow umask to be 000 (patch contributed by Rowan Nairn).

    • ๐Ÿ›  Fixed a bug introduced in 3.0a7 where supervisorctl wouldn't ask for a username/password combination properly from a password-protected supervisord if it wasn't filled in within the "[supervisorctl]" section username/password values. It now properly asks for a username and password.

    • ๐Ÿ›  Fixed a bug introduced in 3.0a7 where would not detect the Python version correctly. Patch by Daniele Paolella.

    • ๐Ÿ›  Fixed a bug introduced in 3.0a7 where parsing a string of key/value pairs failed on Python 2.3 due to use of regular expression syntax introduced in Python 2.4.

    • โœ‚ Removed the test suite for the memmon console script, which was moved to the Superlance package in 3.0a7.

    • โž• Added release dates to CHANGES.txt.

    • Reloading the config for an fcgi process group did not close the fcgi socket - now, the socket is closed whenever the group is stopped as a unit (including during config update). However, if you stop all the processes in a group individually, the socket will remain open to allow for graceful restarts of FCGI daemons. (Roger Hoover)

    • Rereading the config did not pick up changes to the socket parameter in a fcgi-program section. (Roger Hoover)

    • ๐Ÿ‘ป Made a more friendly exception message when a FCGI socket cannot be created. (Roger Hoover)

    • ๐Ÿ›  Fixed a bug where the --serverurl option of supervisorctl would not accept a URL with a "unix" scheme. (Jason Kirtland)

    • ๐Ÿ“ฆ Running the tests now requires the "mock" package. This dependency has been added to "tests_require" in (Roger Hoover)

    • โž• Added support for setting the ownership and permissions for an FCGI socket. This is done using new "socket_owner" and "socket_mode" options in an [fcgi-program:x] section. See the manual for details. (Roger Hoover)

    • ๐Ÿ›  Fixed a bug where the FCGI socket reference count was not getting decremented on spawn error. (Roger Hoover)

    • ๐Ÿ›  Fixed a Python 2.6 deprecation warning on use of the "sha" module.

    • โšก๏ธ Updated to one that knows about setuptools 0.6c11.

    • โš™ Running "supervisorctl shutdown" no longer dumps a Python backtrace when it can't connect to supervisord on the expected socket. Thanks to Benjamin Smith for reporting this.

    • โœ‚ Removed use of collections.deque in our bundled version of asynchat because it broke compatibility with Python 2.3.

    • The sample configuration output by "echo_supervisord_conf" now correctly shows the default for "autorestart" as "unexpected". Thanks to William Dode for noticing it showed the wrong value.

  • v3.0.a7 Changes

    May 24, 2009
    • We now bundle our own patched version of Medusa contributed by Jason Kirtland to allow Supervisor to run on Python 2.6. This was done because Python 2.6 introduced backwards incompatible changes to asyncore and asynchat in the stdlib.

    • The console script memmon, introduced in Supervisor 3.0a4, has been moved to Superlance ( The Superlance package contains other useful monitoring tools designed to run under Supervisor.

    • Supervisorctl now correctly interprets all of the error codes that can be returned when starting a process. Patch by Francesc Alted.

    • New stdout_events_enabled and stderr_events_enabled config options have been added to the [program:x], [fcgi-program:x], and [eventlistener:x] sections. These enable the emitting of new PROCESS_LOG events for a program. If unspecified, the default is False.

    If enabled for a subprocess, and data is received from the stdout or stderr of the subprocess while not in the special capture mode used by PROCESS_COMMUNICATION, an event will be emitted.

    Event listeners can subscribe to either PROCESS_LOG_STDOUT or PROCESS_LOG_STDERR individually, or PROCESS_LOG for both.

    • Values for subprocess environment variables specified with environment= in supervisord.conf can now be optionally quoted, allowing them to contain commas. Patch by Tim Godfrey.

    • โž• Added a new event type, REMOTE_COMMUNICATION, that is emitted by a new RPC method, supervisor.sendRemoteCommEvent().

    • Patch for bug #268 (KeyError on here expansion for stdout/stderr_logfile) from David E. Kindred.

    • โž• Add reread, update, and avail commands based on Anders Quist's online_config_reload.diff patch. This patch extends the "add" and "drop" commands with automagical behavior::

      In supervisorctl:

      supervisor> status bar RUNNING pid 14864, uptime 18:03:42 baz RUNNING pid 23260, uptime 0:10:16 foo RUNNING pid 14866, uptime 18:03:42 gazonk RUNNING pid 23261, uptime 0:10:16 supervisor> avail bar in use auto 999:999 baz in use auto 999:999 foo in use auto 999:999 gazonk in use auto 999:999 quux avail auto 999:999

      Now we add this to our conf:

      [group:zegroup] programs=baz,gazonk

      Then we reread conf:

      supervisor> reread baz: disappeared gazonk: disappeared quux: available zegroup: available supervisor> avail bar in use auto 999:999 foo in use auto 999:999 quux avail auto 999:999 zegroup:baz avail auto 999:999 zegroup:gazonk avail auto 999:999 supervisor> status bar RUNNING pid 14864, uptime 18:04:18 baz RUNNING pid 23260, uptime 0:10:52 foo RUNNING pid 14866, uptime 18:04:18 gazonk RUNNING pid 23261, uptime 0:10:52

      The magic make-it-so command:

      supervisor> update baz: stopped baz: removed process group gazonk: stopped gazonk: removed process group zegroup: added process group quux: added process group supervisor> status bar RUNNING pid 14864, uptime 18:04:43 foo RUNNING pid 14866, uptime 18:04:43 quux RUNNING pid 23561, uptime 0:00:02 zegroup:baz RUNNING pid 23559, uptime 0:00:02 zegroup:gazonk RUNNING pid 23560, uptime 0:00:02 supervisor> avail bar in use auto 999:999 foo in use auto 999:999 quux in use auto 999:999 zegroup:baz in use auto 999:999 zegroup:gazonk in use auto 999:999

    • ๐Ÿ›  Fix bug with symptom "KeyError: 'process_name'" when using a logfile name including documentedprocess_name Python string expansions.

    • Tab completions in the supervisorctl shell, and a foreground mode for Supervisor, implemented as a part of GSoC. The supervisorctl program now has a fg command, which makes it possible to supply inputs to a process, and see its output/error stream in real time.

    • ๐Ÿ–จ Process config reloading implemented by Anders Quist. The supervisorctl program now has the commands "add" and "drop". "add " adds the process group implied by in the config file. "drop " removes the process group from the running configuration (it must already be stopped). This makes it possible to add processes to and remove processes from a running supervisord without restarting the supervisord process.

    • ๐Ÿ›  Fixed a bug where opening the HTTP servers would fail silently for socket errors other than errno.EADDRINUSE.

    • Thanks to Dave Peticolas, using "reload" against a supervisord that is running in the background no longer causes supervisord to crash.

    • ๐Ÿ”ง Configuration options for logfiles now accept mixed case reserved words (e.g. "AUTO" or "auto") for consistency with other options.

    • childutils.eventdata was buggy, it could not deal with carriage returns in data. See Thanks to Ian Bicking.

    • ๐Ÿ”ง Per-process exitcodes= configuration now will not accept exit codes that are not 8-bit unsigned integers (supervisord will not start when one of the exit codes is outside the range of 0 - 255).

    • Per-process directory value can now contain expandable values like %(here)s. (See

    • Accepted patch from Roger Hoover to allow for a new sort of process group: "fcgi-program". Adding one of these to your supervisord.conf allows you to control fastcgi programs. FastCGI programs cannot belong to heterogenous groups.

    The configuration for FastCGI programs is the same as regular programs except an additional "socket" parameter. Substitution happens on the socket parameter with the here and program_name variables::

    [fcgi-program:fcgi_test] ;socket=tcp://localhost:8002 socket=unix:///path/to/fcgi/socket

    • ๐Ÿ”Œ Supervisorctl now supports a plugin model for supervisorctl commands.

    • โž• Added the ability to retrieve supervisord's own pid through supervisor.getPID() on the XML-RPC interface or a new "pid" command on supervisorctl.

  • v3.0.a6 Changes

    April 07, 2008
    • The RotatingFileLogger had a race condition in its doRollover method whereby a file might not actually exist despite a call to os.path.exists on the line above a place where we try to remove it. We catch the exception now and ignore the missing file.
  • v3.0.a5 Changes

    March 13, 2008
    • ๐Ÿ‘ Supervisorctl now supports persistent readline history. To enable, add "history_file = " to the [supervisorctl] section in your supervisord.conf file.

    • Multiple commands may now be issued on one supervisorctl command line, e.g. "restart prog; tail -f prog". Separate commands with a single semicolon; they will be executed in order as you would expect.

  • v3.0.a4 Changes

    January 30, 2008
    • 3.0a3 broke Python 2.3 backwards compatibility.

    • On Debian Sarge, one user reported that a call to options.mktempfile would fail with an "[Errno 9] Bad file descriptor" at supervisord startup time. I was unable to reproduce this, but we found a workaround that seemed to work for him and it's included in this release. See for more information. Thanks to William Dode.

    • ๐Ÿšš The fault ALREADY_TERMINATED has been removed. It was only raised by supervisor.sendProcessStdin(). That method now returns NOT_RUNNING for parity with the other methods. (Mike Naberezny)

    • ๐Ÿšš The fault TIMED_OUT has been removed. It was not used.

    • Supervisor now depends on meld3 0.6.4, which does not compile its C extensions by default, so there is no more need to faff around with NO_MELD3_EXTENSION_MODULES during installation if you don't have a C compiler or the Python development libraries on your system.

    • Instead of making a user root around for the sample.conf file, provide a convenience command "echo_supervisord_conf", which he can use to echo the sample.conf to his terminal (and redirect to a file appropriately). This is a new user convenience (especially one who has no Python experience).

    • โž• Added numprocs_start config option to [program:x] and [eventlistener:x] sections. This is an offset used to compute the first integer that numprocs will begin to start from. Contributed by Antonio Beamud Montero.

    • โž• Added capability for [include] config section to config format. This section must contain a single key "files", which must name a space-separated list of file globs that will be included in supervisor's configuration. Contributed by Ian Bicking.

    • Invoking the reload supervisorctl command could trigger a bug in supervisord which caused it to crash. See . Thanks to William Dode for a bug report.

    • The pidproxy script was made into a console script.

    • The password value in both the [inet_http_server] and [unix_http_server] sections can now optionally be specified as a SHA hexdigest instead of as cleartext. Values prefixed with {SHA} will be considered SHA hex digests. To encrypt a password to a form suitable for pasting into the configuration file using Python, do, e.g.::

      import sha '{SHA}' +'thepassword').hexdigest() '{SHA}82ab876d1387bfafe46cc1c8a2ef074eae50cb1d'

    • The subtypes of the events PROCESS_STATE_CHANGE (and PROCESS_STATE_CHANGE itself) have been removed, replaced with a simpler set of PROCESS_STATE subscribable event types.

    The new event types are:

    PROCESS_STATE # abstract












    The PROCESS_STATE_CHANGE_EXITED_OR_STOPPED abstract event is gone.

    All process state changes have at least "processname", "groupname", and "from_state" (the name of the previous state) in their serializations.

    PROCESS_STATE_EXITED additionally has "expected" (1 or 0) and "pid" (the process id) in its serialization.

    PROCESS_STATE_RUNNING, PROCESS_STATE_STOPPING, PROCESS_STATE_STOPPED additionally have "pid" in their serializations.

    PROCESS_STATE_STARTING and PROCESS_STATE_BACKOFF have "tries" in their serialization (initially "0", bumped +1 each time a start retry happens).

    • โœ‚ Remove documentation from README.txt, point people to .

    • The eventlistener request/response protocol has changed. OK/FAIL must now be wrapped in a RESULT envelope so we can use it for more specialized communications.

    Previously, to signify success, an event listener would write the string OK\n to its stdout. To signify that the event was seen but couldn't be handled by the listener and should be rebuffered, an event listener would write the string FAIL\n to its stdout.

    In the new protocol, the listener must write the string::

    RESULT {resultlen}\n{result}

    For example, to signify OK::

    RESULT 2\nOK

    To signify FAIL::


    See the scripts/ script for an example.

    • To provide a hook point for custom results returned from event handlers (see above) the [eventlistener:x] configuration sections now accept a "result_handler=" parameter, e.g. "result_handler=supervisor.dispatchers:default_handler" (the default) or "handler=mypackage:myhandler". The keys are pkgutil "entry point" specifications (importable Python function names). Result handlers must be callables which accept two arguments: one named "event" which represents the event, and the other named "result", which represents the listener's result. A result handler either executes successfully or raises an exception. If it raises a supervisor.dispatchers.RejectEvent exception, the event will be rebuffered, and the eventhandler will be placed back into the ACKNOWLEDGED state. If it raises any other exception, the event handler will be placed in the UNKNOWN state. If it does not raise any exception, the event is considered successfully processed. A result handler's return value is ignored. Writing a result handler is a "in case of emergency break glass" sort of thing, it is not something to be used for arbitrary business code. In particular, handlers must not block for any appreciable amount of time.

    The standard eventlistener result handler (supervisor.dispatchers:default_handler) does nothing if it receives an "OK" and will raise a supervisor.dispatchers.RejectEvent exception if it receives any other value.

    • Supervisord now emits TICK events, which happen every N seconds. Three types of TICK events are available: TICK_5 (every five seconds), TICK_60 (every minute), TICK_3600 (every hour). Event listeners may subscribe to one of these types of events to perform every-so-often processing. TICK events are subtypes of the EVENT type.

    • Get rid of OSX platform-specific memory monitor and replace with, which works on both Linux and Mac OS. This script is now a console script named "memmon".

    • ๐Ÿ‘ Allow "web handler" (the handler which receives http requests from browsers visiting the web UI of supervisor) to deal with POST requests.

    • RPC interface methods stopProcess(), stopProcessGroup(), and stopAllProcesses() now take an optional "wait" argument that defaults to True for parity with the start methods.

  • v3.0.a3 Changes

    October 02, 2007
    • ๐Ÿ‘ Supervisorctl now reports a better error message when the main supervisor XML-RPC namespace is not registered. Thanks to Mike Orr for reporting this. (Mike Naberezny)

    • ๐Ÿ“ฆ Create scripts directory within supervisor package, move there, and place sample event listener and comm event programs within the directory.

    • When an event notification is buffered (either because a listener rejected it or because all listeners were busy when we attempted to send it originally), we now rebuffer it in a way that will result in it being retried earlier than it used to be.

    • When a listener process exits (unexpectedly) before transitioning from the BUSY state, rebuffer the event that was being processed.

    • supervisorctl tail command now accepts a trailing specifier: stderr or stdout, which respectively, allow a user to tail the stderr or stdout of the named process. When this specifier is not provided, tail defaults to stdout.

    • ๐Ÿ”Š supervisor clear command now clears both stderr and stdout logs for the given process.

    • When a process encounters a spawn error as a result of a failed execve or when it cannot setuid to a given uid, it now puts this info into the process' stderr log rather than its stdout log.

    • The event listener protocol header now contains the server identifier, the pool that the event emanated from, and the poolserial as well as the values it previously contained (version, event name, serial, and length). The server identifier is taken from the config file options value identifier, the pool value is the name of the listener pool that this event emanates from, and the poolserial is a serial number assigned to the event local to the pool that is processing it.

    • The event listener protocol header is now a sequence of key-value pairs rather than a list of positional values. Previously, a representative header looked like::


    Now it looks like::

    ver:3.0 server:supervisor serial:21 ...
    • ๐Ÿ›ฐ Specific event payload serializations have changed. All event types that deal with processes now include the pid of the process that the event is describing. In event serialization "header" values, we've removed the space between the header name and the value and headers are now separated by a space instead of a line feed. The names of keys in all event types have had underscores removed.

    • ๐ŸŒฒ Abandon the use of the Python stdlib logging module for speed and cleanliness purposes. We've rolled our own.

    • ๐Ÿ›  Fix crash on start if AUTO logging is used with a max_bytes of zero for a process.

    • ๐Ÿ‘Œ Improve process communication event performance.

    • The process config parameters stdout_capturefile and stderr_capturefile are no longer valid. They have been replaced with the stdout_capture_maxbytes and stderr_capture_maxbytes parameters, which are meant to be suffix-multiplied integers. They both default to zero. When they are zero, process communication event capturing is not performed. When either is nonzero, the value represents the maximum number of bytes that will be captured between process event start and end tags. This change was to support the fact that we no longer keep capture data in a separate file, we just use a FIFO in RAM to maintain capture info. For users whom don't care about process communication events, or whom haven't changed the defaults for stdout_capturefile or stderr_capturefile, they needn't do anything to their configurations to deal with this change.

    • ๐ŸŒฒ Log message levels have been normalized. In particular, process stdin/stdout is now logged at debug level rather than at trace level (trace level is now reserved for output useful typically for debugging supervisor itself). See "Supervisor Log Levels" in the documentation for more info.

    • When an event is rebuffered (because all listeners are busy or a listener rejected the event), the rebuffered event is now inserted in the head of the listener event queue. This doesn't guarantee event emission in natural ordering, because if a listener rejects an event or dies while it's processing an event, it can take an arbitrary amount of time for the event to be rebuffered, and other events may be processed in the meantime. But if pool listeners never reject an event or don't die while processing an event, this guarantees that events will be emitted in the order that they were received because if all listeners are busy, the rebuffered event will be tried again "first" on the next go-around.

    • Removed EVENT_BUFFER_OVERFLOW event type.

    • The supervisorctl xmlrpc proxy can now communicate with supervisord using a persistent HTTP connection.

    • A new module "supervisor.childutils" was added. This module provides utilities for Python scripts which act as children of supervisord. Most notably, it contains an API method "getRPCInterface" allows you to obtain an xmlrpclib ServerProxy that is willing to communicate with the parent supervisor. It also contains utility functions that allow for parsing of supervisor event listener protocol headers. A pair of scripts ( and were added to the script directory that serve as examples about how to use the childutils module.

    • A new envvar is added to child process environments: SUPERVISOR_SERVER_URL. This contains the server URL for the supervisord running the child.

    • An OK URL was added at /ok.html which just returns the string OK (can be used for up checks or speed checks via plain-old-HTTP).

    • An additional command-line option --profile_options is accepted by the supervisord script for developer use::

      supervisord -n -c sample.conf --profile_options=cumulative,calls

    The values are sort_stats options that can be passed to the standard Python profiler's PStats sort_stats method.

    When you exit supervisor, it will print Python profiling output to stdout.

    • If cElementTree is installed in the Python used to invoke supervisor, an alternate (faster, by about 2X) XML parser will be used to parse XML-RPC request bodies. cElementTree was added as an "extras_require" option in

    • โž• Added the ability to start, stop, and restart process groups to supervisorctl. To start a group, use start groupname:*. To start multiple groups, use start groupname1:* groupname2:*. Equivalent commands work for "stop" and "restart". You can mix and match short processnames, fullly-specified group:process names, and groupsplats on the same line for any of these commands.

    • โž• Added directory option to process config. If you set this option, supervisor will chdir to this directory before executing the child program (and thus it will be the child's cwd).

    • โž• Added umask option to process config. If you set this option, supervisor will set the umask of the child program. (Thanks to Ian Bicking for the suggestion).

    • A pair of scripts and have been added to the scripts directory. If they are used together as described in their comments, processes which are consuming "too much" memory will be restarted. Theeventgen` script only works on OSX (my main development platform) but it should be trivially generalizable to other operating systems.

    • ๐Ÿ”ง The long form --configuration (-c) command line option for supervisord was broken. Reported by Mike Orr. (Mike Naberezny)

    • ๐Ÿ†• New log level: BLAT (blather). We log all supervisor-internal-related debugging info here. Thanks to Mike Orr for the suggestion.

    • We now allow supervisor to listen on both a UNIX domain socket and an inet socket instead of making them mutually exclusive. As a result, the options "http_port", "http_username", "http_password", "sockchmod" and "sockchown" are no longer part of the [supervisord] section configuration. These have been supplanted by two other sections: [unix_http_server] and [inet_http_server]. You'll need to insert one or the other (depending on whether you want to listen on a UNIX domain socket or a TCP socket respectively) or both into your supervisord.conf file. These sections have their own options (where applicable) for port, username, password, chmod, and chown. See README.txt for more information about these sections.

    • All supervisord command-line options related to "http_port", "http_username", "http_password", "sockchmod" and "sockchown" have been removed (see above point for rationale).

    • ๐Ÿ‘‰ The option that used to be sockchown within the [supervisord] section (and is now named chown within the [unix_http_server] section) used to accept a dot-separated value. The separator now must be a colon ":", e.g. "user:group". Unices allow for dots in usernames, so this change is a bugfix. Thanks to Ian Bicking for the bug report.

    • ๐Ÿ’ป If a '-c' option is not specified on the command line, both supervisord and supervisorctl will search for one in the paths ./supervisord.conf , ./etc/supervisord.conf (relative to the current working dir when supervisord or supervisorctl is invoked) or in /etc/supervisord.conf (the old default path). These paths are searched in order, and supervisord and supervisorctl will use the first one found. If none are found, supervisor will fail to start.

    • The Python string expression %(here)s (referring to the directory in which the the configuration file was found) can be used within the following sections/options within the config file::

      unix_http_server:file supervisor:directory supervisor:logfile supervisor:pidfile supervisor:childlogdir supervisor:environment program:environment program:stdout_logfile program:stderr_logfile program:process_name program:command

    • ๐Ÿšš The --environment aka -b option was removed from the list of available command-line switches to supervisord (use "A=1 B=2 bin/supervisord" instead).

    • If the socket filename (the tail-end of the unix:// URL) was longer than 64 characters, supervisorctl would fail with an encoding error at startup.

    • The identifier command-line argument was not functional.

    • ๐Ÿ›  Fixed (bad error message in supervisorctl when program command not found on PATH).

    • Some child processes may not have been shut down properly at supervisor shutdown time.

    • ๐Ÿšš Move to ZPL-derived (but not ZPL) license available from; it's slightly less restrictive than the ZPL (no servicemark clause).

    • Spurious errors related to unclosed files ("bad file descriptor", typically) were evident at supervisord "reload" time (when using the "reload" command from supervisorctl).

    • We no longer bundle ez_setup to bootstrap setuptools installation.

  • v3.0.a2 Changes

    August 24, 2007
    • ๐Ÿ›  Fixed the README.txt example for defining the supervisor RPC interface in the configuration file. Thanks to Drew Perttula.

    • ๐Ÿ›  Fixed a bug where process communication events would not have the proper payload if the payload data was very short.

    • when supervisord attempted to kill a process with SIGKILL after the process was not killed within "stopwaitsecs" using a "normal" kill signal, supervisord would crash with an improper AssertionError. Thanks to Calvin Hendryx-Parker.

    • ๐Ÿง On Linux, Supervisor would consume too much CPU in an effective "busywait" between the time a subprocess exited and the time at which supervisor was notified of its exit status. Thanks to Drew Perttula.

    • RPC interface behavior change: if the RPC method "sendProcessStdin" is called against a process that has closed its stdin file descriptor (e.g. it has done the equivalent of "sys.stdin.close(); os.close(0)"), we return a NO_FILE fault instead of accepting the data.

    • ๐Ÿ”„ Changed the semantics of the process configuration autorestart parameter with respect to processes which move between the RUNNING and EXITED state. autorestart was previously a boolean. Now it's a trinary, accepting one of false, unexpected, or true. If it's false, a process will never be automatically restarted from the EXITED state. If it's unexpected, a process that enters the EXITED state will be automatically restarted if it exited with an exit code that was not named in the process config's exitcodes list. If it's true, a process that enters the EXITED state will be automatically restarted unconditionally. The default is now unexpected (it was previously true). The readdition of this feature is a reversion of the behavior change note in the changelog notes for 3.0a1 that asserted we never cared about the process' exit status when determining whether to restart it or not.

    • develop (and presumably install) would fail under Python 2.3.3, because setuptools attempted to import splituser from urllib2, and it didn't exist.

    • It's now possible to use install and develop on systems which do not have a C compiler if you set the environment variable "NO_MELD3_EXTENSION_MODULES=1" in the shell in which you invoke these commands (versions of meld3 > 0.6.1 respect this envvar and do not try to compile optional C extensions when it's set).

    • โœ… The test suite would fail on Python versions <= 2.3.3 because the "assertTrue" and "assertFalse" methods of unittest.TestCase didn't exist in those versions.

    • The supervisorctl and supervisord wrapper scripts were disused in favor of using setuptools' console_scripts entry point settings.

    • ๐Ÿ“š Documentation files and the sample configuration file are put into the generated supervisor egg's doc directory.

    • ๐ŸŒ Using the web interface would cause fairly dramatic memory leakage. We now require a version of meld3 that does not appear to leak memory from its C extensions (0.6.3).